Welcome to Ham Radio Duo — Exploring the airwaves together!

Print Your Own Pebble HF Case

Print Your Own Pebble HF Case

Pebble HF Case - Green
Pebble HF Case - Black
Printed by Joshua, N5FY

Here are the files to print your own case for the Pebble HF. You can print them in any color you choose, add your callsign, or modify it.

The case comes in two versions: 20m (the default) and 40m. Only the Top and Lettering are different. The Base and knobs are the same for both.

Printing Instructions

We use PETG-HF for both the case and the knob.

For Bambu printers, you should simply have to open the .3mf file, change any filaments to match yours, and print. It will prompt you if you have a different printer. For other printers, you will need to import the .stl files. For Bambu, we import the top and lettering file at the same time and it combines them. We place it face down and it barely uses any extra filament for the tower from being two colors.

Download Files

Which files do I need?

  • Bambu printer: download the one .3mf file for your band. It has the whole case, ready to print.
  • Other printers: download the Top and Lettering for your band, plus the Base.
  • Everyone: pick one knob.
Part 20m (default) 40m
Complete case for Bambu (.3mf) 20m .3mf (301 KB) 40m .3mf (292 KB)
Top (.stl) 20m Top (617 KB) 40m Top (597 KB)
Lettering (.stl) 20m Lettering (704 KB) 40m Lettering (680 KB)
Base (.stl) Base (105 KB), same for both
Knob (.stl), pick one Regular, 16.5mm outer (377 KB)
Larger, 24mm outer (356 KB)

What is Pebble HF?

Check out pebblehf.com to learn all about the Pebble HF.